Product Display
| material | density | hardness | strength | Hard elongation |
|---|---|---|---|---|
| 316L | 7.9 g/cm3 | HV160 | 530MPa | 50% |
| 17-4PH Sintered state | 7.7 g/cm3 | HRC28 | 850MPa | 7% |
| 17-4PH heat treated state | 7.7 g/cm3 | HRC40 | 1100MPa | 5% |
| 304 | 7.8 g/cm3 | HRB60 | 500MPa | 70% |
| 410 | 7.6 g/cm3 | HRC45 | 900MPa | 7% |
| 420 | 7.6 g/cm3 | HRC53 | 900MPa | 6% |
| 440C | 7.6 g/cm3 | HRC62 | 950MPa | 5% |
| HK30(310S) heat resistant steel | 7.9 g/cm3 | HRC30 |
Quality assurance: The company has many years of experience in R&D and production of metal powder injection molding, and has a complete R&D and production team. Evaluation and other services.
Production capacity: The company covers an area of ??6,000 square meters and has a production workshop of 4,000 square meters. It has 10 injection molding machines, 3 mixing equipment, 5 sintering furnaces, and more than 60 employees. It also has mold processing capabilities and has 5 mold processing workshops. , 4 sets of wire cutting equipment, 2 sets of EDM equipment, 2 sets of ordinary lathes, 1 set of machining center, stainless steel monthly production capacity of 6 tons, ceramic production capacity of 3 tons, cemented carbide production capacity of 20 tons, short mold processing cycle, maintenance Convenient, can be quickly adjusted according to customer requirements, timely delivery.
Testing equipment: The company has complete product testing procedures. In addition to dimensional testing and sintering density testing for general parts, it also cooperates with the Institute of Powder Metallurgy, University of Science and Technology Beijing, and uses the conditions of its Beijing Key Laboratory of Powder Metallurgy to test the particle size, particle size, and sintering density of raw materials. The composition and purity are tested, and the quality is controlled from the source of the material. Scanning chemical analyzer is used to detect the composition and internal structure of the material after sintering, and the mechanical properties of the material such as tensile strength, flexural strength, fatigue strength and material hardness are detected by means of material physical detection, and the neutral salt spray test is used. Test the corrosion resistance of the material. To achieve controllable process, stable and reliable product performance, and provide guidance and assistance for the research and development of new products and new materials. Meet the customized requirements of different customers for products.
Powder injection: our company has independent intellectual property rights of feeding preparation technology, strictly controls the feeding preparation process of each batch, establishes a good cooperative relationship with raw material suppliers, and conducts customized production according to product characteristics and performance requirements to ensure the quality of raw materials , For the injection molding process, the process parameters are strictly formulated, and the operators are not allowed to adjust the molding parameters without approval during the operation process to ensure the consistency of the formed blank. Paper records are made at regular intervals to ensure process traceability and reliability. In the process of finished product inspection, random inspection is carried out in strict accordance with the sampling standards, some parts are fully inspected, and the physical properties of materials are generally inspected.
Regional Leading Optical & MIM Products Company
